Beneteau Oceanis 411 celebration used

XBOAT ref: 269.
I am selling my 2003 BENETEAU OCEANIS 411 Célébration, race-cruiser version.
Length: 12.78 m
Beam: 3.94 m
Draft: 2.00 m
3 cabins
Engine: Volvo Penta 55cv < 2000h
Last service in 2025 before the boat was taken out of the water.
Brunton Autoprop H5 propeller, overhauled in 2024
Bow thruster
Lofrans Tigre 1500w windlass (2024)
Quick control and helm station
ANCHORING EQUIPMENT:
ROCNA anchor (25 kg) on 50 m of chain + anchor line
CQR-type anchor on 20 m of chain + anchor line
Flat anchor + chain for splicing
POWER 12V BATTERY BANK:
Engine = 120 Ah Dual EFB (2023)
Service = 3 x 190 Ah VARTA Dual Purpose
Bow bank = 3 x 80 Ah VARTA AGM (for thruster and windlass)
Marlec Dolphin Premium 12.40 automatic charger (for all 3 battery banks)
2 x 185 W Victron Energy 2025 solar panels on the gantry
Distribution panel for all 3 battery banks
SilentwindPro wind turbine installed in 2026 on the boom
Connected to the service battery bank
WAI 50A engine alternator + secondary alternator
Original 220 V circuit in excellent condition
SAILS:
Full-batten mainsail on cars in excellent condition
New Sumbrella lazy bag (2026)
High-tenacity Dacron triradial genoa (2023)
Solent on releaseable forestay (in France) with Pelican turnbuckle (in excellent condition)
Asymmetric spinnaker with ELVSTROM sock—new, never used
FACNOR SD 180 furler
WINCHES:
2x Lewmar 48 ST in the cockpit, 2x Harken 53 ST for headsails
ELECTRONICS:
Raymarine hydraulic autopilot with LECOMBLE and SCHMITT actuator
Maintenance scheduled for 2024; rudder replaced in 2023.
Raymarine ST 6001+ package
Raymarine RC530 chartplotter
Fururno NX Navtex300
Navicom RT 650 VHF
Cobra Portable VHF
Furuno Radar
Mac Murdo M10 Wi-Fi AIS Transponder (2023)
1200w Inverter
Victron BMV 700 Battery Monitor (2026)
COMFORT:
Pressurized water in galley and 2 bathrooms
Jabsco pumps refurbished in 2023
Jabsco manual toilets (aft toilet pump replaced in 2026)
Black water tank in aft toilet
HeaterQUICK water system
ENO 0420 gas stove with oven
Cape Mustang watermaker
New 2025 upholstery
Slatted bed frame in the forward cabin
USB ports or cigarette lighter outletsCigar holders in all 3 cabins
LED lighting
220V vacuum cleaner + 12V vacuum cleaner
RECENT WORK:
2023, Replacement of rudder bushings, Refurbishment of the keel with 5 layers of epoxy
2024: Exhaust elbow replacement, propeller refurbishment, hydrolube bushing replacement
Replacement of keel and propeller shaft anodes
2025, Refurbishment of the engine water pump
3D Tender