Beneteau First 21.7 used

The 2007 model was the last series to come with a certificate of unsinkability, as indicated by the
shipyard plaque affixed to the hull.
Movable centerboard overhauled in 2023 with replacement of: plastic hinge sleeve,
AISI 316 centerboard-to-hull mounting brackets (the originals were made of iron), and mounting screws. Filled with epoxy filler.
Rigging and halyards completely replaced,
including turnbuckles in 2023
Original Z-type mast foot and boom hinge2023 Replacement Parts
Professional repainting of the hull sides completed in 2023
Original Z-brand mast base and boom hinge2023 Replacement Spars
Mainsail and Jib Halyards Replaced in 2023 with Premium Ropes DX Performance lines, made of Dyneema SK38 with polyester coating
The uprights that center the hoisting block (mainsail block) are orange-painted steel tubes
to be secured during the operation to the base of the stanchions using a special aluminum clamp
.
For added safety, two eyelets have been mounted on the mast to which the jib sheets can be attached.
By positioning the jib traveller blocks with the pulleys aligned with the mast base hinge, the taut sheets
and the fittings described above ensure the mast remains centered throughout the entire hoisting stroke.
The rear mast support frame is removable, made of aluminum, and allows for a hoist
during the first part of the hoisting stroke—the part where the bow hoist exerts the most force.
Before hoisting, install the shrouds with the turnbuckles fully loosened.