A finish of gelcoat NG isophthalic for gloss and a final aspect of high quality. Polyester resins are used through all the construction. Each batch of resin and gelcoat undergoes OQUE Construction by infusion under vacuum of a sandwich of balsa. Construction monolytic for the keel area. A "barrier coat" anti-osmose. HULL STRUCTURE A hull of the 3 contre-moule th generation is glued and laminated re. Bottom of the contre-moule cut for access to the hull. 8 HULL PORTHOLES Acrylic glued outside the hull. PARTITIONS glued to the hull and the deck with a glue PU. SHIMS with gelcoat finishing. Bridge INJECTED in a mold into two parts via the Prisma Process ®. The soul and the tissues are put in place to dry before the mussels are closed. After the closing the resin is injected and the result is a very high quality bridgeé with a good finish on both sides and a weight reduction of 30% compared to a traditional bridge. In addition this process reduces more than 90% the emission of VOCs in the atmosphere tests in the laboratory before use. A finite element calculation made for areas of significant stress during the design process.
Tutti i dati contenuti nella scheda della New Boat Jeanneau yacht 54 new sono stati inseriti dal venditore
Riviera Yacht Agency Logos, photos and all copyrighted information belong to the legitimate owners.
The published data are not intended to constitute part of an offer or contract and are believed to be correct but not guaranteed.
Last update of the card 07.30.2020